DRILLFAST

The intended use for this product is to increase penetration rate without altering the fluid viscosity and represents a tremendous improvement to lubricant technology.

Drillfast® was designed to attract metal surfaces, and reduce the sticking coefficient of clay particles. It is an ideal additive for any water base fluid, but is especially effective in a fluid where calcium or potassium is used for additional inhibition in fluids containing lime, gyp or salt . Drillfast® is not an emulsifier or coupler. Its purpose is to enhance the lubricity coefficient of water and can be used as is, but best
cost/performance is achieved by adding 5 to 20 percent by weight to 400-600 molecular weight glycol & water with an emulsifier, or the same amount to Isomerized Alpha Olefin C-16/C18 or equivalent.

SPECIFICATIONS
Appearance Specific Gravity @ 72Á F pH Flash Point Pour Point	Clear Amber Liquid 1.000 - 1.010 0.91 - 0.92 >300º F < 0º F

PACKAGING, HANDLING AND STORAGE

Drillfast® is packaged in 55-gallon poly drums or bulk containers that are appropriately labeled.